I am definitely able to talk to the device (192.168.0.29) through the LAN -- can access web UI and ping it. That's a start.

I can also see the router's web UI at 192.168.0.1.

But the router cannot ping the device.

Maybe this is an address-space issue? The phone and the router are both providing DHCP, and they're both using 192.168.x.x -- but that's same as DSL modem. The router is supposed to act as a client on the portal(?)'s DHCP.

Owait, device can't connect to phone. Ok. :puzzled:

@woozle both using 192.168.0.x (subnet mask usually used for homes is 255.255.255.0) meaning only the last octet/8bits is used for address that computer, rest is the subnet/network mask

@LottieVixen I just wasn't sure if maybe the two DHCP servers were fighting with each other.

...but access to the phone's DHCP should only be through the router anyway, so it shouldn't matter. I know this works because the DSL modem is set up that way too... oh wait! No it isn't. Aha.

Frontier modem is 192.168.254.254, and the router's connection to it is 192.168.254.2.

Ok, so I think I need to tell phone to use 192.168.253.x or something.

@woozle okay check the network mask on the modem, (probably 255.255.255.0)

wait what are you trying to do again,.

@LottieVixen I should draw a diagram, shouldn't I...

I have a fancy switch which can handle up to 4 internet connections (with load-balancing and stuff). It's got the DSL modem as WAN1, which seems to be providing a trickle of internet despite the modem insisting it's still "connecting...".

I want WAN2 to go through the phone via this WLAN hub here.

I also want to pause the cats until I'm done. Just, you know, put them into suspend mode so they won't keep having Needs... >.<

@woozle why not just teather the phone and use a computer as a bridge (allowing internet access to everything else on the network)

@LottieVixen (a) because I have only the vaguest idea how to do that, (b) would mean dedicating a laptop (presumably -- needs wireless, right?) to being a bridge, (c) I have this device here which is supposed to be able to do that, and has a nice UI for it.

I am tethering the phone, yes. The only reason I have usable internet (as opposed to the trickle through DSL) right now is because I'm going directly from my laptop to the phone via tether.

@woozle okay well you are half way there that laptop can act as a bridge

@LottieVixen I *should* learn how to do this some day.

I think I've got the core problem solved, though; router is able to talk to internet thru phone. Now I just need to tell it to stop trying to use the DSL (at least by default).

Follow

@LottieVixen Actually, what I'd really like to learn is how to set up cheap hardware as a Linux-based router, so I can do more complex stuff with logging and filtering.

I did have a box serving as a router, several years ago, but it was a maintenance headache. I have since forgotten even the name of the DNS software.

· · Web · 0 · 0 · 0

@woozle dnsmasq most likely your laptop can do logging also btw

@LottieVixen That was it! Yes.

My laptop is overloaded. I know routing is probably pretty lightweight, but...

Also, I think I'd have to plug it into the LAN to do routing (we have at least 2 desktop users here, can't access WiFi) which would be annoying.

@woozle ah...that's not been an issue for me before (i dont move much sometimes)

@LottieVixen I like to take it off the place I keep it and sit with it on the couch to work (though right now I'm using it on its shelf... and it's making my back hurt, but I need to be able to access my desktop PC as well; it's my lifeline to the LAN).

Shorter: cables are annoying.

@woozle see when i've not been able to use wifi for some reason, or i've needed to teather, I just bought more ethernet cable than i needed signal is good for a long distance anyway :p

@woozle wait you have two desktop users, plug the phone into their desktop and teather, you can use ethernet when you need it other than that there isn't a solution (that I can currently see) without buying a usb wifi dongle

@LottieVixen If it comes down to it, at THIS point (having solved the basic connectivity problem) I think if I just unplug WAN1, the router will go "Oh, that seems to be down..." and failover to WAN2.

I guess I'm just obsessively trying to do this Right. I don't like using tech I don't understand...

...and there are times when it would be nice to use those failover features properly -- e.g. an upload is clogging the DSL bandwidth, so use the cell connection until it's done.

@woozle you can probably configure that, i hope it works out

@woozle also dont obsess over it, might stress yourself out...I just lazily try things until they work (unless its teaching <3 that )

Sign in to participate in the conversation
Toot.Cat

The social network of the future: No ads, no corporate surveillance, ethical design, and decentralization! Own your data with Mastodon!